San-Ei Seiko(Shanghai) Co.,Ltd.
- Both truing and dressing are accomplished at the same time.
- Rapid completion.
- No special equipment or processing is required.
- High accuracy wheel (run-out,shape,etc) is obtained.
- High truing efficiency is assured.
Air Conditioner Parts
Vane
The materials are diversified, mainly including stainless steel, high-speed steel and powder metallurgy materials.
Automobile Parts
Rotor Oil Pump Drive
Rotor Oil Pump Driven
Rotor Oil Pump Drive
Rotor Oil Pump Driven
PS Vane
Automobile Parts
Automobile Parts
Automobile Parts
X-POWER Features
| X-POWER Standard Specification | |||
| Model Number | Dimensions(mm) | Applications | Forms |
| SX-A1 | 24×15×100 | Surface Grinding |  |
| SX-A2 | 24×20×155 | ||
| SX-A3 | 24×23×220 | ||
| SX-B1 | Φ30×20×80 | Cylindrical Grinding |  |
| SX-B2 | Φ30×30×130 | ||
| SX-C1 | Φ30×Φ12×20 | Internal Grinding |  |
| SX-C2 | Φ48×Φ24×20 | ||
| SX-C3 | Φ70×Φ40×20 | ||
| SX-D1 | Φ20×Φ11×55 | Tool Grinding Universal Grinding |  |
| SX-E1 | 45×15×90 | Side-face Grinding |  |
| SX-F1 | Φ11×20×50 | Tool Grinding Universal Grinding |  |
| SX-Z | Special forms. | ||
| Special specifications are also acceptable. Please consult us！ | |||
Surface Grinding
Cylindrical Grinding
| Wheel：CBN170N100 | |||
Grinding Conditions |
Dresser | S50C | X-POWER（SX-A1) |
| Wheel Speed | 10.5 m/s(1000 rpm) | ||
| Table Speed | 15 m/min | ||
| Traverse Speed | 215 mm/min | ||
| Total Depth of Cut | 0.200 mm | ||
| Wheel Dimentions | Φ198.902×15 | Φ199.000×15 | |
| Depth of Cut/Pass | 4 μm | 5 μm | |
| Results | Wheel Wear | 0.005 mm | 0.049 mm |
| Dresser Wear | 0.190 mm | 0.147 mm | |
| Truing Time | 10.5min | 7.5min | |
| Truing Ratio | 0.098 | 1.250 | |
| Motor Current | 5 A | 5 A | |
| Workpiece : SKH51 (HRC63) | Surface Roughness | Ra 0.723 | Ra 0.648 |
| Straightness | 1.0 μm | 0.6 μm | |